Choosing the right Penny board wheels depends on size, hardness, and how you ride. Small, 60mm wheels preserve nimbleness on crowded streets, while a softer durometer helps you grip rough pavement without losing control. High-quality bearings and proper spacers reduce noise and drag, yielding a smoother roll and longer life. The following five options balance size, durability, and compatibility so you can select wheels that fit a Penny board or similar mini cruiser, whether you’re cruising sidewalks, weaving through traffic, or practicing street tricks.
| Product | Wheel Size | Hardness | Bearings | Notes |
|---|---|---|---|---|
| LOOEEL 60mm Penny Board Wheels | 60mm diameter, 45mm width | 80A | ABEC-9 (608RS) bearings installed | Pre-installed bearings and spacers; includes riser pads and screws; ideal for Penny boards and cruisers |
| KMX 22″ Skateboard (Blue LED Light Up Wheels) | 60x45mm PU wheels (approx.) | 82A | ABEC-9 | ABEC-9 bearings; LED light-up wheels; 22″ mini cruiser sized for kids and adults seeking a compact ride |
| Retrospec Quip Mini Cruiser Skateboard | PU wheels (size not specified) | Not specified (ABEC-7 mentioned) | ABEC-7 | Fully assembled mini cruiser; ultra-portable under 5 pounds; smooth street riding with soft wheels |
| vanpro DIY Electric Skateboard 7243 70MM Wheel Pulleys Kit | 70–72mm wheels (kit) | Not specified | Not specified in listing | Wheel kit with pulleys for penny-board style builds; includes pulleys and hardware; requires compatibility checks with motor mount |
| WHEELGOO 2-Pack 76mm Replacement Wheels | 76mm diameter | 90A | Not specified | Designed for caster boards; compatible with Razor RipStik and similar models; higher hardness favors speed on smooth surfaces |
LOOEEL 60mm Penny Board Wheels
LOOEEL’s 60mm cruiser wheels are a practical upgrade for Penny boards and compact cruisers. Each wheel measures 60mm in diameter and 45mm in width, a size that preserves maneuverability in tight urban spaces while still delivering useful roll on typical street surfaces. The 80A durometer strikes a balance between grip and slide, helping you carve corners without feeling the wheel too sticky on asphalt. Pre-installed 608 Black ABEC-9 bearings with spacers reduce setup time and ensure a smooth, fast roll from the moment you mount them. The kit includes riser pads and standard hardware, making it easier to fit these wheels onto most Penny board trucks. On rough pavement, the softer PU still absorbs some impact, enhancing comfort and confidence during long commutes. As with any wheel upgrade, check clearance with your truck axles to avoid wheel bite on tight turns.
In terms of performance, the combination of high-precision ABEC-9 bearings and a soft, wear-resistant PU compound supports steady acceleration and stable cruising. The bearings’ quiet operation minimizes noise on city streets, while the spacers ensure proper bearing alignment for optimal spin. The wheel design emphasizes longevity and consistent wear, reducing the need for frequent replacements. For riders who want a straightforward upgrade without changing trucks or hardware, these wheels offer a reliable upgrade path with solid grip and predictable handling. They’re also a solid choice for beginners seeking improved stability without sacrificing the classic Penny board feel.
Installation is straightforward for riders familiar with wheel swaps. The supplied spacers fit standard ABEC-9 bearing setups, and the included riser pads help offset wheel bite on some trucks. If you ride on rough pavement or cobblestones, consider slightly softer bushings in your trucks to complement the wheel’s grip level. Overall, LOOEEL’s 60mm wheels deliver a familiar Penny board experience with improved bearings, smoother rolling, and a durable build that can withstand daily commutes and casual park sessions alike.
KMX 22″ Skateboard With LED Wheels
KMX’s 22″ mini cruiser is designed for kids and light-duty cruising, pairing a compact deck with bright, eye-catching LED wheels. The board uses 82A PU wheels—slightly softer than typical street wheels—to improve grip on sidewalks and asphalt, reducing chatter on uneven surfaces. The wheels are 60x45mm, a familiar dimension for riders transitioning from a Penny board to a slightly larger board, helping preserve maneuverability while expanding stability and control. ABEC-9 bearings are included to keep rolling smooth and quiet, supporting quick starts and steady cruising through urban environments. The board itself weighs about 3.7 pounds, making it easy to carry in a backpack or locker. LED wheels add visibility for after-school rides or dusk sessions, though battery life and brightness may vary with use and surface conditions. This setup suits younger riders seeking a small, portable board with a dash of flair and reliable roll on everyday pavement.
For Penny board enthusiasts, the KMX 22″ offers a complementary step up in board size without straying far from the familiar wheel feel. The 82A durometer paired with ABEC-9 bearings provides a balanced ride—soft enough to absorb minor cracks but firm enough to keep up speed on smooth surfaces. The combination of a compact deck and LED wheels can be appealing for riders who want a stylish, easy-to-transport option that still performs well on sidewalks, driveways, and campuses. As with any upgrade, verify truck compatibility and ensure the wheel wells clear the deck when turning or performing tricks. This board is best suited for casual cruising and light trick practice rather than aggressive downhill riding.
vanpro DIY Electric Skateboard 7243 70MM Wheel Pulleys Kit
The vanpro 7243 wheel kit targets DIY electric skateboard builds and penny-board-inspired layouts, featuring 70–72mm wheels with a pulley kit designed for custom setups. The kit includes pulleys and spacers that support a wide range of drive configurations, making it a flexible option for riders who want to experiment with motor-assisted rides or unique push/pull dynamics on small wheels. The listing notes compatibility considerations, specifically checking the PU wheel hole style, motor shaft diameter, and whether the setup is compatible with a motor bracket before purchasing. This is a niche option best suited for experienced builders who want to tailor ride characteristics—speed, acceleration, and torque—through wheel size and pulley ratios. If your aim is a simple Penny board replacement, other options in this guide may offer a quicker upgrade.
From a technical perspective, the 72mm-appearing diameter in the product description provides a slightly larger rolling surface than a classic Penny wheel, potentially improving stability at speed and over minor cracks. The included pulley system can help optimize gearing for electric drive, but it requires careful alignment with your motor and deck clearance. Prospective buyers should have a clear plan for installation and electrical integration, along with the right tools and safety checks. For riders seeking a hands-on, customizable approach to a micro or Penny-board-style ride, this kit offers a pathway to a personalized performance profile.
WHEELGOO 76mm Replacement Wheels
The WHEELGOO 76mm wheels are designed as a direct replacement option for caster boards and similar micro-boards, offering a somewhat larger wheel footprint compared with Penny-sized wheels. At 76mm, they provide additional stability and smoother rolling on smoother surfaces, which is beneficial for riders seeking a comfortable glide across sidewalks and plazas. The 90A hardness rating indicates a relatively firm wheel that prioritizes speed and durability, especially on well-maintained pavement. Compatibility is a key factor: these wheels are marketed toward Razor RipStik Classic Air, DLX, G RipSurf and related models, so confirm your current board’s axle width, bearing size, and mounting geometry before purchase. If your Penny board or mini cruiser uses a tight wheel well or tight clearance, these wheels may require truck or deck adjustments. They’re a solid option for riders who want a sturdier wheel with a crisp roll on smooth surfaces.
From a performance standpoint, the higher durometer reduces grip, which can improve top-end speed but may reduce grip on rough or wet surfaces. Riders who value speed and durability over soft landings should consider these wheels for longer commutes on clean edges and even terrain. Installation is straightforward for those familiar with wheel swaps, though it’s advisable to inspect wheel holes, spacers, and bearing fitment to ensure proper seating. This option is best for riders who want a push-friendly wheel replacement that emphasizes speed and resilience on paved paths.
Buying Guide
Key considerations emerge when choosing Penny board wheels. First, diameter matters: 60mm wheels are classic for Penny boards, delivering a nimble, turn-responsive ride, while larger options (70–76mm) can boost speed and stability on smoother surfaces but may require deck clearance and truck adjustments. Durometer (hardness) is the next major factor. Softer wheels (78A–82A) grip better on rough pavement and dampen vibration, while harder wheels (90A+) roll faster on smooth asphalt but transmit more vibration. Bearing quality, typically indicated by ABEC ratings, influences spin losses and noise; higher ABEC ratings often translate to smoother, longer spins. Compatibility is also critical: confirm wheel bore size (usually 8mm), spacers, and whether the wheel clears the trucks without rubbing. Some products come with pre-installed bearings and spacers, which eases installation; others require separate purchases for hardware. If you ride on mixed surfaces, look for a versatile option like the LOOEEL 60mm wheels with 80A hardness and ABEC-9 bearings for reliable everyday performance. For riders seeking a larger footprint on flat surfaces, the WHEELGOO 76mm wheels provide speed with caution about deck clearance. Finally, always verify compatibility with your current trucks and riser pads to prevent wheel bite and ensure a safe, comfortable ride.
Comparing the featured options helps match your riding goals. The LOOEEL 60mm Penny Board Wheels deliver classic Penny feel with upgraded bearings, a solid choice for daily commuting and park runs. The KMX 22″ board offers LED wheels and ABEC-9 bearings, combining style with solid performance in a compact cruiser. The Retrospec Quip Mini Cruiser emphasizes portability and ease of use, ideal for riders who want a ready-to-roll setup without extra assembly. The vanpro kit targets DIY enthusiasts who want a fully customized ride, including pulleys for motorized setups, though it requires careful compatibility checks. The WHEELGOO 76mm wheels provide a larger wheel option for smoother rolling on compatible caster-board designs, which can also appeal to riders seeking stability on longer street routes.